Glock Instructions

Glock 42/43 +1/2/3 Instructions

1. Remove the factory base plate from your magazine.2
2. Use a sharp knife/blade to remove the tabs/ears off the magazine.
3. Place the magazine insert into your HYVE +2 extension with the
   button facing down into the hole in the extension.
4. Depress the spring into the magazine with your finger and slide
   the magazine into the extension while keeping the extension flat
   so the insert stays in place.
5. Push the magazine into the extension until you hear the spring
   drop into the extension (it will be a tight fit) and the magazine
   clicks over the locking tab on the extension.

Glock17/22/34/35 Plus 5 instructions

1. Remove the factory base plate from your magazine.
2. Use a sharp knife/blade to remove the tabs/ears off the magazine.
3. Insert the factory magazine insert into the extension.
4. Depress the spring into the magazine with your finger and slide
   the magazine in to the extension while keeping the extension flat
   so the insert stays in place.
5. Push the magazine into the extension until you hear the spring
   drop into the extension.
6. Screw the stop in the magazine extension with the provided screw.
   To use without mag stop, use the provided screws to secure the
   mag in place

Glock 19/23/26/27/33/36 Extension Instructions

1. Remove the factory base plate from your magazine.
2. Use a sharp knife/blade to remove the tabs/ears off the magazine.
3. Insert the factory magazine insert into the extension.
4. Depress the spring into the magazine with your finger and
   slide the magazine into the extension while keeping the
   extension flat so the insert stays in place.
5. Push the magazine into the extension until you hear the
   spring drop into the extension.
6. Screw the stop in the magazine extension with the provided screw.

Glock 43x/48 Plus 2 Instructions

1. Remove the factory base plate from your magazine.
2. Use a sharp knife/blade to remove the tabs/ears off the magazine.
3. Insert factory magazine insert into the extension.
4. Depress the spring into the magazine with your finger and slide
   the magazine into the extension while keeping the extension flat
   so the insert stays in place.
5. Push the magazine into the extension until you hear the spring
   drop into the extension.
6. Screw the stop in the magazine extension with the provided screw.

Glock Trigger Adjustment Instructions

1. Pre-travel adjustment screw
   Turn the set screw clockwise with
   the provided allen wrench to
   decrease the trigger’s pre-travel.

2. Reset set screw
3. Turn the set screw Clockwise with the provided
allen wrench to decrease the reset.